Need Help?
Call an heating expert on 01282 429061
Need Help?
Call an heating expert on 01282 429061
| Manufacturer Warranty | 5 Years (T&C’s Apply) |
|---|---|
| Orientation | Vertical Orientation |
| Colour | White |
| Height | 1800 mm |
| Width | 335 mm |
| Heat Output Watts | 1584 |
| Heat Output BTU | 5404 |
| Radiator Pipe Centres (mm) (Plus Valves) | approx. 335 |
| Radiator Projection (mm) | 130-140 |
| Radiator Wall To Pipe Centres (mm) | 30-40 |
| Manufacturer | Kartell |
| Manufacturer Part No | LK31800335 |
A tower of heat on the footprint of a bookcase spine: 335mm wide, three columns deep, 5,404 BTU (1,584W) at Delta T60. Where the slim two-column version warms a hallway, this one heats it properly - the extra 100mm-deep column bank adds nearly forty percent more output without claiming another millimetre of width. Entrance halls with a single narrow pier of wall are its natural habitat.
Construction is laser-welded mild steel in gloss white powder coat, pressure tested to 10 bar and guaranteed for five years by Kartell. Brackets and fixings are in the box. Its seven sections mirror the proportions of original Edwardian columns almost exactly.
Range photography is for illustration - the number of sections varies with the size ordered. This listing is the 1800 x 335mm 3 column model with 7 sections. Dimension drawing included in the gallery.
A radiator only looks right when it heats right, so check the numbers first.
| Output at Delta T60 (Kartell published) | 5,404 BTU / 1,584W |
|---|---|
| Output at Delta T50 (calculated, EN442 factor) | approx. 4,264 BTU / 1,250W |
| Typical room coverage | roughly 10-13 square metres in an average UK home |
Coverage is a guide only - insulation, glazing area and ceiling height change the sums. Use a BTU calculator with your room dimensions before ordering, and size up slightly for north-facing or draughty rooms.
| Range | Kartell K-Rad Laser Klassic |
|---|---|
| Type | 3 column radiator (vertical) |
| Height x Width | 1800 x 335mm |
| Column depth | 100mm (allow 130-140mm wall to front face) |
| Sections | 7 |
| Heat output (Delta T60) | 5,404 BTU / 1,584W |
| Heat output (Delta T50, calculated) | approx. 4,264 BTU / 1,250W |
| Finish | Gloss white powder coat over mild steel |
| Material | Laser-welded mild steel |
| Tapping centres | approx. 335mm - valves at bottom opposite ends |
| Weight (empty) | 31.25kg |
| Pressure tested | 10 bar |
| Guarantee | 5 years (register with Kartell UK) |
| In the box | Radiator, wall brackets, fixing kit, instructions |
| Valves | Not included - sold separately |
Any heating engineer will treat this as a straightforward swap or first fix.
Valves are not included. You need a pair: one wheelhead or thermostatic (TRV) valve plus one lockshield. Angled valves suit pipework rising from the floor; straight valves suit wall-fed pipe runs.
See our radiator valves range - the Kartell TRV and lockshield twin packs pair perfectly.
Orders are picked from live UK stock. Radiators are palletised or double-boxed and checked before dispatch - please inspect on arrival and note any transit damage with the driver.