Need Help?
Call an heating expert on 01282 429061
| Manufacturer Warranty | 5 Years (T&C’s Apply) |
|---|---|
| Orientation | Vertical Orientation |
| Colour | White |
| Height | 1800 mm |
| Width | 335 mm |
| Heat Output Watts | 1139 |
| Heat Output BTU | 3885 |
| Radiator Pipe Centres (mm) (Plus Valves) | approx. 335 |
| Radiator Projection (mm) | 98-108 |
| Radiator Wall To Pipe Centres (mm) | 30-40 |
| Manufacturer | Kartell |
| Manufacturer Part No | LK21800335 |
The slimmest white Laser Klassic vertical turns a 335mm sliver of wall - the gap beside a bedroom door, the return wall of an en-suite, the end of a galley kitchen - into 3,885 BTU (1,139W) of heating at Delta T60. Seven sections rise a full 1800mm in classic gloss white, the finish that has defined column radiators in British homes for a century.
Kartell builds it from laser-welded mild steel with a 68mm two-column profile, pressure tests it to 10 bar and includes wall brackets and fixings in the box. The five year guarantee covers the finish as well as the body - gloss white powder coat wipes clean and never yellows like painted cast iron.
Range photography is for illustration - the number of sections varies with the size ordered. This listing is the 1800 x 335mm 2 column model with 7 sections. Dimension drawing included in the gallery.
The right radiator is the one sized to the room, not the biggest that fits the wall.
| Output at Delta T60 (Kartell published) | 3,885 BTU / 1,139W |
|---|---|
| Output at Delta T50 (calculated, EN442 factor) | approx. 3,065 BTU / 898W |
| Typical room coverage | roughly 7-9 square metres in an average UK home |
Coverage is a guide only - insulation, glazing area and ceiling height change the sums. Use a BTU calculator with your room dimensions before ordering, and size up slightly for north-facing or draughty rooms.
| Range | Kartell K-Rad Laser Klassic |
|---|---|
| Type | 2 column radiator (vertical) |
| Height x Width | 1800 x 335mm |
| Column depth | 68mm (allow 98-108mm wall to front face) |
| Sections | 7 |
| Heat output (Delta T60) | 3,885 BTU / 1,139W |
| Heat output (Delta T50, calculated) | approx. 3,065 BTU / 898W |
| Finish | Gloss white powder coat over mild steel |
| Material | Laser-welded mild steel |
| Tapping centres | approx. 335mm - valves at bottom opposite ends |
| Weight (empty) | 21.4kg |
| Pressure tested | 10 bar |
| Guarantee | 5 years (register with Kartell UK) |
| In the box | Radiator, wall brackets, fixing kit, instructions |
| Valves | Not included - sold separately |
Any heating engineer will treat this as a straightforward swap or first fix.
Valves are not included. You need a pair: one wheelhead or thermostatic (TRV) valve plus one lockshield. Angled valves suit pipework rising from the floor; straight valves suit wall-fed pipe runs.
See our radiator valves range - the Kartell TRV and lockshield twin packs pair perfectly.
Orders are picked from live UK stock. Radiators are palletised or double-boxed and checked before dispatch - please inspect on arrival and note any transit damage with the driver.
