Trustpilot
  • Klarna
    Spread The Cost With Klarna
  • Clearpay
    Spread The Cost With Clearpay
  • Free UK Delivery
    Free Delivery Orders Over £500 Excludes boilers
  • Price Match Promise
    Price Match Promise We won't be beaten on price

Reina Touch Thermostatic Element 300W Chrome — Touch Thermostatic Heating Element

In stock
SKU
ELMTCH030C
Now £89.28 Was £144.00

Need Help?

Call an heating expert on 01282 429061

Key Features

More Information
Brand Reina
Manufacturer Warranty 1 Year (T&C’s Apply)
Colour Chrome
Manufacturer Reina
Manufacturer Part No ELMTCH030C
Wattage 100W - 300W
Smart Features Open Window Detection
Bathroom Safe Yes
IP Rating IP44

Product Details

HomeElectric HeatingHeating Elements & ControlsThermostatic ControlsReina Touch Thermostatic Element 300W Chrome — Touch Thermostatic Heating Element
Reina Electric Heating — Touch Thermostatic Heating Element

Reina Touch Thermostatic Element 300W Chrome — Touch Thermostatic Heating Element

A premium 300W touch-controlled thermostatic heating element in Chrome — converts any compatible heated towel rail to electric or dual-fuel operation with precise temperature control from 30°C to 60°C. IP44 splashproof rating and 5-hour auto-off timer. 1 year Reina manufacturer guarantee.

300W30°C–60°CIP44 RatedChrome5hr Auto-Off1yr GuaranteeSKU: ELMTCH030C
300W
Power
60°C
Max Temp
IP44
Water Rating
5hr
Auto-Off
230V
Voltage
1yr
Guarantee
IMPORTANT: Please inspect all goods on delivery. Any transit damage MUST be reported within 24 hours of receipt. See our Returns & Refunds Policy for full details.
Product images are for illustration purposes. Always refer to the specification tab and product code for exact details. Colour finish may vary slightly between batches.
The Reina Touch Thermostatic Heating Element 300W Chrome is the premium upgrade choice for anyone converting a standard heated towel rail to electric or dual-fuel. Unlike basic on/off elements, this thermostatic version lets you set an exact temperature between 30°C and 60°C using a sleek touch interface — you only pay to heat the towels to the temperature you actually want. SKU: ELMTCH030C.
The Reina Touch Thermostatic Element 300W Chrome transforms any compatible heated towel rail into a fully independent electric or dual-fuel unit with precise temperature control. The Chrome finish matches Reina’s Chrome designer towel rails and most popular UK Chrome ranges perfectly. With a 5-hour auto-off timer, IP44 splashproof rating and a clean touch-button display, it’s safe for bathrooms and delivers warm towels in minutes without running your central heating. Backed by a 1 year Reina manufacturer guarantee.
Free Delivery Over £500
1 Year Reina Guarantee
IP44 Splashproof
UK 3-Pin Plug Included
Touch Controlled

Why Choose This Reina Product

1

Precise Touch Temperature Control

Set the exact temperature you want from 30°C to 60°C with intuitive touch buttons — no twist dials, no guesswork. The clear LED display shows your target temperature at a glance.

2

300W Output — Right for Medium to Large Rails

The 300W output is well matched to most UK heated towel rails, heating a full rail of towels in 20–30 minutes. Higher wattage = faster warm-up.

3

Matching Chrome Designer Finish

The Chrome housing matches Reina’s Chrome towel rail ranges and complements virtually every UK Chrome towel rail and bathroom suite for a clean, integrated look.

4

IP44 Splashproof — Bathroom Safe

The IP44 rating allows safe installation in bathroom zones with appropriate clearance from water sources, in line with UK Wiring Regulations BS 7671 Section 701.

5

5-Hour Auto-Off Timer Built In

The automatic shut-off after 5 hours prevents the element from being left on accidentally — lowering running costs and adding a layer of safety, especially in family bathrooms.

6

1 Year Reina Manufacturer Guarantee

Full 1 year coverage on the genuine Reina-branded element, registered with Reina Designer Radiators — supplied through authorised UK distribution.

SpecificationDetails
Product NameReina Touch Thermostatic Element 300W Chrome — Touch Thermostatic Heating Element
SKU / Reina CodeELMTCH030C
BrandReina Designer Radiators
Element TypeTouch Thermostatic Heating Element
Power Output300W
Voltage230V AC, 50Hz (UK Standard)
Temperature Range30°C to 60°C (adjustable)
Control TypeTouch-button interface with LED display
Auto-Off Timer5 hours
IP RatingIP44 — splashproof, bathroom safe with appropriate zoning
FinishChrome
MaterialBrass body with powder-coat finish, stainless steel rod
Thread / Connection1/2 inch BSP (standard UK radiator tapping)
Cable Length1.5m (approx)
Plug TypeUK 3-pin moulded plug (fitted)
Weight0.5kg
CompatibilityMost UK heated towel rails with 1/2 inch BSP bottom tapping
Manufacturer Guarantee1 year — Reina Designer Radiators
Need a different wattage, finish or pairing?
View the full Heating Elements & Controls range for alternative wattages and finishes, or call 01282 429061 Mon–Fri for expert advice on the right pairing.
Electrical safety: All electrical work must comply with the latest UK Wiring Regulations (BS 7671). For bathroom installations, the power supply (fused spur or socket) must be located outside zones 0, 1 and 2. If you are not competent in electrical work, employ a qualified electrician. Always isolate the supply before any work.

Step-by-Step Installation

  1. Drain the towel rail — if currently plumbed to central heating, isolate at both valves, open the air vent and fully drain the water out of the rail.
  2. Remove the existing bottom blanking plug from the towel rail tapping where the element will go (usually the right-hand side for right-handed cable exit).
  3. Apply PTFE tape to the element thread (around 10–15 wraps in the direction of tightening) to ensure a watertight seal.
  4. Hand-thread the element into the towel rail tapping, then tighten with a spanner. Do not over-tighten — finger tight plus one full turn is usually sufficient.
  5. Refill the towel rail with water via the air vent or the opposite tapping. For electric-only operation, fill until water flows from the air vent then close it. Leave a small air gap (around 10%) for thermal expansion.
  6. For dual-fuel installations, fit a Reina Dual-Fuel T-Piece (sold separately) at the flow side to maintain the central heating connection while allowing independent electric operation.
  7. Plug the element into a switched fused spur located outside bathroom zones 0, 1 and 2 (or use the fitted plug if installing in a kitchen / utility room).
  8. Power on, set your target temperature using the touch interface, and check for any leaks at the thread connection over the first 24 hours.

Frequently Asked Questions

Will this 600W element fit my existing heated towel rail?

Yes — if your heated towel rail has a 1/2 inch BSP bottom tapping, this element will fit. That covers almost all UK heated towel rails sold in the last 20 years, including Reina, Kartell, Heatwave, MHS, Heritage and most own-brand rails. If you’re unsure, call 01282 429061 and we’ll confirm.

Is this the right wattage for my towel rail?

Match wattage to rail size: 300W for small rails (under 800mm), 600W for medium rails (800–1200mm), 900W for large rails or panel radiators (1200mm+). Higher wattage = faster warm-up.

Can I use this element with my central heating system at the same time?

Yes — this is called a dual-fuel installation. You’ll need a Reina Dual-Fuel T-Piece (sold separately) which lets you run the central heating in winter and the electric element in summer (or when you just want warm towels without firing up the boiler).

How long does it take to heat a towel rail?

A typical 1000mm chrome towel rail with a 600W element set to 60°C will reach full operating temperature in around 20–30 minutes from cold. The thermostat then cycles the element to maintain the target temperature, which uses far less power than running continuously.

Is it safe to install in a bathroom?

Yes — the IP44 rating makes this element splashproof and safe for UK bathroom zone 2 (and zone 1 with additional protection). The power supply must be located outside zones 0, 1 and 2 per BS 7671.

Does it remember my temperature setting after power loss?

Yes — the touch thermostatic control retains your last set temperature, so after a power cut or auto-off, you can resume at the same setting with a single tap.

What’s the difference between this and the On/Off Touch element?

The On/Off Touch Element simply switches on at full power and runs until you switch it off. The Touch Thermostatic Element lets you set a target temperature and intelligently cycles the element to maintain it, which is significantly more energy-efficient.

Browse the full Reina range at PlumbXtra, our complete heating elements and controls collection, or visit our electric heating department for more options. Need help choosing the right product? Our UK heating experts are available Mon–Fri on 01282 429061.

Delivery & Returns

Delivery InformationDetails
Free DeliveryOn all orders over £500 to UK mainland
Standard Delivery2–5 working days, tracked courier
CoverageUK mainland; surcharges may apply for Highlands, Islands, NI and Channel Islands
Delivery NotificationTracking number emailed on dispatch
Inspection on DeliveryInspect goods on arrival — damage must be reported within 24 hours
Failed DeliveryCourier will leave a card — rearrange via the tracking link or contact us
Returns PolicyDetails
Return Window14 days from receipt to notify us of a return
ConditionItem must be unused, in original packaging, and in resaleable condition
Return PostageBuyer is responsible for return shipping costs (unless item is faulty or damaged)
Refund MethodRefund to original payment method within 7 working days of safe receipt
Faulty / Damaged ItemsReported within 24 hours of delivery — we’ll arrange free replacement or refund
Full PolicyRead our complete Returns & Refunds Policy
Need help with delivery, returns or this product?
Our UK heating experts are available Mon–Fri 9am–5pm. Call 01282 429061 or use our contact page.