Trustpilot
  • KlarnaClearpayPayPal Spread The CostKlarna, Clearpay or PayPal
  • Expert AdviceCall 01282 429061
  • Free UK Delivery Free DeliveryOrders Over £500Excludes boilers and worktops
  • Price Match Promise Price Match PromiseWe won't be beaten on price

How much does a new bathroom cost in the UK?

Last reviewed: 17 October 20268 minute read
Short answer: a standard three piece UK bathroom costs about £5,500 to £8,500 supplied and fitted. A small cloakroom or two piece room under 4m² is about £3,000 to £5,000, a large family bathroom £7,500 to £11,000, and a high spec room £12,000 to £20,000 or more. Labour is usually £2,000 to £4,000 of that, and a typical refit takes 5 to 10 working days. The biggest savings come from keeping the toilet and shower where they are, using wall panels instead of tiles, and buying the parts yourself.

New bathroom cost by room size

These are supply and fit prices for 2026, from Screwfix's published new bathroom cost guide. They include the suite, labour and finishing, and assume the room keeps roughly the same layout.

RoomSizeWhat is in itTypical cost, supplied and fitted
Small or cloakroomUnder 4m²Two piece: toilet and basin£3,000 to £5,000
Standard bathroom4m² to 8m²Three piece: bath or shower, toilet, basin£5,500 to £8,500
Large family bathroom6m² to 9m²Four piece: bath, separate shower, toilet, basin£7,500 to £11,000
High spec or luxuryOver 9m²Freestanding bath, walk-in shower, premium finishes£12,000 to £20,000+

Other UK sources land in the same place. Checkatrade puts a low to mid range bathroom, including materials, at £5,500 to £8,000, with an average of about £7,000, and a high end or complex job at £14,000 or more. MyBuilder's average is lower, at about £4,500. It does not say how that figure is worked out, so it may not compare directly with the Screwfix and Checkatrade ranges.

Bathroom cost calculator

Pick your room and the extras you want. We will give you a realistic supplied and fitted range based on 2026 UK prices.

Method: room ranges from Screwfix's 2026 new bathroom cost guide. Moving fittings adds £500 to £1,000 (Screwfix). Underfloor heating adds about £100 per m² (Checkatrade, March 2026). This is an estimate for budgeting; get at least two written quotes before you commit.

Where the money goes

MyBuilder's August 2026 figures break a typical bathroom job down like this:

Part of the jobTypical cost
Suite installation£600 to £1,500
Plumbing£800 to £1,200
Tiling£800 to £1,500
Electrics (lights, fan, shaver point)£500 to £800
Flooring£400 to £600
Painting and decorating£300 to £600
Ripping out the old bathroom (Checkatrade)£600 to £1,000, plus skip hire

Day rates from Screwfix's 2026 guide: a plumber charges about £325 to £450 a day and a tiler about £200 to £350 a day. Total labour for a full refit usually comes to £2,000 to £4,000 (MyBuilder).

What the parts cost: a real shower room example

This is a 1200 x 800mm walk-in shower area with a basin and towel rail, priced from the PlumbXtra range at the time of review, including VAT. It shows how the parts side of a budget adds up.

ItemProductPrice
Shower trayDUSC stone resin tray, 1200 x 800mm, 30mm low profile£210.13
Shower doorDUSC Momentum 1200mm sliding door, chrome, 8mm glass£277.97
ShowerDUSC Core concealed shower set with riser rail, chrome£289.94
Wall panels, two shower walls3 x Kartell PVC wall panels, 2400 x 1000mm, 10mm£135.00
Vanity unit and basinBarcelona white 550mm vanity unit and basin£99.00
Basin tapDUSC Core mono basin mixer, chrome£61.85
Towel railKartell K-Rail 400 x 800mm, matt black£57.61
TotalToilet, waste, valves and sundries not included£1,131.50

Delivery is calculated at checkout and varies by item and supplier. Choosing brass or gunmetal brassware or a designer towel rail will raise the total, and you will also need a toilet and plumbing sundries, which Screwfix puts at £300 to £600 for a full bathroom.

Three we recommend most often

White DUSC stone resin rectangular shower tray 1200 x 800mm, 30mm low profileDUSC Stone Resin Shower Tray 1200 x 800mm30mm low profile, white. The DUSC stone resin range runs from 900 x 800mm to 1700 x 900mm, including bath-replacement sizes.£210.13View tray
Chrome DUSC Core concealed shower set with round head, riser rail and handsetDUSC Core Concealed Shower Set with Riser Rail, ChromeValve, overhead head and handset on a riser rail in one box. Also in black, brass, bronze and gunmetal.£289.94View shower
Kartell white marble effect PVC bathroom wall panel, 2400 x 1000mmKartell PVC Wall Panel, 2400 x 1000mm10mm thick, no grout. Six finishes: white marble, gilded marble, white gloss, concrete white, arctic sparkle and graphite quartz.£45.00View panel

Seven ways to cut the cost

  • Keep the layout. Moving the toilet or waste can add £500 to £1,000 and up to 30% on labour (Screwfix). Swapping like for like is the single biggest saving.
  • Use wall panels instead of tiles. A 2400 x 1000mm Kartell PVC wall panel is £45, which works out at under £19 per m², with no grout to clean. Wall tiling typically costs £800 to £1,500 as a job (MyBuilder).
  • Replace the bath with a shower tray. A 1700 x 700mm or 1700 x 800mm tray fits the space a standard bath leaves, and our stone resin trays start at £131.65.
  • Buy the parts yourself. If your fitter supplies the parts, the price usually includes a margin on them. Buying the brassware, enclosure and tray direct and paying for labour only keeps you in control of the spec and the price.
  • Choose one finish and stick to it. Chrome is usually the cheapest finish across our taps and showers; other finishes usually cost the same or up to about a quarter more, with some items 30% to 40% more, and brushed nickel can be much more.
  • Re-use the radiator pipework for a towel rail. A towel rail on the existing radiator tails avoids new pipe runs. Our towel radiators start at £57.61.
  • Get at least two written quotes that list the same items, so you are comparing like with like.

Small bathroom ideas that save space and money

  • Sliding or bi-fold shower doors need no swing space. Our bi-fold doors start at 700mm wide and our quadrant enclosures at 800 x 800mm.
  • A wet room screen instead of a full enclosure makes a small room feel bigger. KVit wet room screens start at 700mm.
  • A compact vanity unit hides pipes and adds storage in a 550mm footprint.
  • A concealed shower valve keeps the wall clear and is easier to clean than an exposed bar valve.
  • Light, large format wall panels in white gloss or marble effect reflect light and have fewer joins than tiles.
  • A slim towel rail doubles as the room's heating and fits beside a door or basin.

How long does a new bathroom take?

A standard like for like refit takes 5 to 10 working days (Checkatrade and Screwfix agree). Checkatrade says a smaller renovation can take as little as 2 days, a small budget bathroom 6 to 12 days and a luxury bathroom 9 to 16 days. Expect the room to be out of use for most of that time, so plan for a second toilet or shower if you only have one.

Common questions

How much does a new bathroom cost on average in the UK?

Checkatrade's March 2026 average is about £7,000 for a low to mid range bathroom, including materials and fitting. Screwfix puts a standard three piece bathroom at £5,500 to £8,500. MyBuilder's average is about £4,500.

How much does it cost to fit a bathroom if I supply everything?

Labour for a full bathroom is usually £2,000 to £4,000 (MyBuilder), plus tiling or panelling, electrics and decorating if your fitter does not include them. Plumbers charge about £325 to £450 a day and tilers £200 to £350 a day (Screwfix, 2026).

Is a shower room cheaper than a bathroom?

Often, yes. A shower tray, enclosure and shower valve cost less than a bath with a shower screen, and a shower room is often smaller. The labour is similar, so the saving is mainly on parts and tiling area.

Are wall panels cheaper than tiles?

For most bathrooms, yes. A Kartell 2400 x 1000mm PVC wall panel costs £45, under £19 per m², and goes up in large sheets with no grout. Tiles cost £15 to £50 per m² to buy (Screwfix), before adhesive, grout and a tiler's time.

Do I need building regulations approval for a new bathroom?

In England, a like for like refit usually does not need Building Regulations approval. You may need it for new or altered waste pipes and drainage, a new electrical circuit, a new fuse box, or adding to or changing wiring near the bath or shower. A registered electrician can sign that electrical work off; otherwise, tell building control before you start. Keep or replace any existing extractor fan, and a new bathroom needs one. All gas work must be done by a Gas Safe registered engineer. Rules differ in Scotland and Wales, so if in doubt, ask your installer or local building control.

Do you fit bathrooms?

No. PlumbXtra supplies bathroom products for delivery; we do not install. Most of our customers buy the parts from us and use their own plumber or bathroom fitter.

Planning a bathroom?

Call our team on 01282 429061, Monday to Friday 7:30am to 5pm and Saturday 8am to 2pm. Send us your room size and the parts you want, and we will price the full list for you.

Shop bathroomsShop showersShop wall panels