Trustpilot
  • Klarna
    Spread The Cost With Klarna
  • Clearpay
    Spread The Cost With Clearpay
  • Free UK Delivery
    Free Delivery Orders Over £500 Excludes boilers and worktops
  • Price Match Promise
    Price Match Promise We won't be beaten on price

White 3 Column Radiator 500 x 605mm - DUSC Columns

In stock
SKU
DUSC-COL-3H-500X605-W
£160.00

Need Help?

Call an heating expert on 01282 429061

Key Features

More Information
Manufacturer Warranty 5 Years (T&C’s Apply)
Orientation Horizontal Orientation
Colour White
Height 500 mm
Width 605 mm
Heat Output Watts 658
Heat Output BTU 2,242
Radiator Pipe Centres (mm) (Plus Valves) 605 mm
Radiator Projection (mm) 118 mm
Radiator Wall To Pipe Centres (mm) 68 mm
Manufacturer DUSC
Manufacturer Part No DUSC-COL-3H-500X605-W

Product Details

DUSC Columns

White 3 Column Radiator 500 x 605mm - DUSC Columns - 2,242 BTU

Traditional cast iron looks in modern mild steel, made in the exact size 500 x 605mm - not the nearest size. 2,242 BTU at Delta T50 with 605mm pipe centres.
White3 ColumnHorizontal13 Sections5 Year GuaranteeFree UK Delivery
2,242
BTU dT50
658W
Watts dT50
500mm
Height
605mm
Width
118mm
Projection
5yr
Guarantee
Overview

The classic column radiator profile in white, 500mm high by 605mm wide. 13 sections of 3 column mild steel give 2,242 BTU, which suits a room of about 4 to 5 square metres in an average UK home.

Every DUSC Columns radiator is pressed from mild steel and finished in a hard-wearing white powder coat, then backed by a 5 year guarantee. The range runs to 94 sizes, which is the whole point of it: instead of forcing your wall to suit a radiator, you pick the one that actually fits. This one measures 500mm high, 605mm wide and sits 118mm off the wall.

Not the size you need? See the full column radiator range, or browse every white radiator we stock.

Room photography shows the range style - section count varies by size, so refer to the specification table for this exact model.

Sizing Guide

Match the radiator to the room rather than the gap in the wall. These are the published outputs for this size:

Heat output at Delta T502,242 BTU / 658 watts
Typical room coverageroughly 4 to 5 square metres in an average UK home
Sections13

Use the BTU calculator on this page with your room's real dimensions before ordering, and size up slightly for north facing or draughty rooms.

Coverage is a guide only - insulation, glazing area and ceiling height all change the sums.

Specifications
RangeDUSC Columns
Type3 column radiator (horizontal)
Height x Width500 x 605mm
Projection from wall118mm
Sections13
Heat output (Delta T50)2,242 BTU / 658 watts
Pipe centres605mm
Wall to pipe centres68mm
FinishWhite powder coat over mild steel
MaterialMild steel
Weight (empty)19.36kg
Guarantee5 years
In the boxRadiator, wall brackets, fixing kit, instructions
ValvesNot included - sold separately
Fitting
Replacing an existing radiator? This size has 605mm pipe centres. If your current pipework measures 605mm centre to centre, this radiator drops straight onto it - no re-piping, no floorboards up.

Fitting is a routine job for any plumber or a confident DIY installer.

  • Connects to a standard UK two-pipe central heating system.
  • Pipe centres 605mm, valves at bottom opposite ends. Add 90mm to the pipe centre measurement when fitting with valves.
  • Brackets hold the radiator 118mm off the wall - allow for that when planning skirting or furniture.
  • Empty weight is 19.36kg and heavier full of water: fix into masonry or studwork, and use fixings rated for the filled weight on plasterboard.
  • Flush the system and dose inhibitor after fitting, as with any steel radiator.
Feet & Valves

Matching 3 column feet are available with this radiator in white, supplied as a pair and finished to match. They stand 140mm high and give the radiator the look of a traditional floor standing cast iron column radiator. Add them from the dropdown above.

The feet are decorative and are not load bearing. The radiator must still be fixed to the wall using the brackets supplied - the wall fixings carry the full weight of the radiator when it is filled with water.

Valves are not included - you need a pair: one wheelhead or thermostatic valve and one lockshield. Browse our radiator valves and accessories, including thermostatic radiator valves.

  • Traditional cross-head valves complete the period look.
  • A thermostatic valve holds bedrooms and snugs at a set temperature.
  • Angled, corner and straight valves all suit this radiator - choose by where your pipes come out of the wall or floor.
Delivery & Returns

Orders are picked from live UK stock and sent out carefully packed.

  • FREE UK mainland delivery on this radiator - typically 3 to 5 working days.
  • Check the radiator on arrival and report any transit damage straight away.
  • 30 day returns on unused radiators in original packaging.
  • Questions on access or timed delivery? Call us on 01282 429063.
Frequently Asked Questions
This size has 605mm pipe centres. If your existing pipework measures 605mm centre to centre, it fits without re-piping. Measure centre to centre across your current valves, and add 90mm to the pipe centre figure when fitting with new valves.
2,242 BTU per hour (658 watts) at Delta T50, from 13 sections. That suits a room of roughly 4 to 5 square metres in an average UK home, though insulation and glazing change the sums - use the BTU calculator on this page.
No. The feet are decorative and are not load bearing. The wall brackets supplied carry the full filled weight - the radiator weighs 19.36kg empty and more once filled, so use fixings rated for it, particularly on plasterboard.
The radiator itself in white, wall brackets, a fixing kit and instructions. Valves are not included and are sold separately. Feet, where offered, are added from the dropdown on this page.
94 sizes in the rangeThe exact size, not the nearest size
Free UK mainland deliveryTypically 3 to 5 working days
Plumbing trade expertsReal advice from PlumbXtra Burnley